The System VS Ordinary Doors & Windows Which Is Better?

1. The technology is different

We all know that door and window enterprises are not producers of doors and Windows, but assemblers of door and window accessories. The quality of aluminum doors and Windows depends more on the splicing strength and sealing of accessories. The traditional Angle group process of ordinary doors and Windows is used to extrude aluminum Angle code + Angle impact connection, and then apply sealant on the knife edge of the extrusion Angle, and the real need to seal the aluminum profile joint does not have sealant, and rain water will enter the inside of the door and window through the splicing capillary seam, such a process cannot guarantee the tightness of the Angle group and the sealing of the joint.

The system doors and Windows are different, it uses a special cast aluminum corner code with hollow stainless steel pins + glue. It has two advantages over the traditional process, one, expansion tensioning fixed technology, two, glue sealing technology. Each cast aluminum corner code is composed of two pieces of cast aluminum, when the stainless steel hollow pin into, the two pieces of cast aluminum will automatically open, plus the corner code pin hole and profile pin hole with tolerance, the two 45 degree splicing profiles firmly tight, fixed. After fixing, glue should be injected into the corner code through the injection hole of the pin. After the completion of gluing, the 45 degree joint of the profile is completely sealed with glue from the inside of the cavity. In this way, the gap between the corner code and the profile cavity is completely sealed, effectively ensuring the good air tightness of the doors and Windows of the system.

2. Stability and performance

The system doors and Windows have an independent technical department, which will conduct strict testing and inspection of each component to ensure the stability of doors and Windows. After 2 to 3 years of research and development of the system doors and Windows, the performance and quality of the material, the whole door and window are comprehensively tested, and the mature products are launched after reaching the expected goals.

Ordinary doors and Windows are assembled according to their own needs to order different parts, due to the different quality of each part, different performance and other factors, resulting in relatively poor stability in the process of use; Moreover, it is a temporary integrated door and window product for a single project, which is often not fully tested.

3. In terms of flexibility

System doors and Windows are serialized, standardized products, each component is fixed according to different performance, notch structure, material supply, etc., has a strong exclusibility and incompatibility, is based on the needs of the project to choose a series, flexibility is small, but now is the era of customization, system doors and Windows can be designed according to customer needs applicable door and window products.

Ordinary doors and Windows can be configured according to their own needs, door and window materials can be selected by domestic and foreign manufacturers, and can also be temporarily opened, with strong flexibility, but its quality and standardization can not be guaranteed.

4. Software and after-sales service

System doors and Windows provide products at the same time, but also provide design software, design manuals, procurement manuals, processing manuals, professional equipment and technical service support, is a complete industry chain. In terms of after-sales service, the quality assurance of the system doors and Windows is not only the engineering quality assurance of the doors and Windows unit, but also the life warranty of the system company’s products. In addition, brand stores can carry out simple repairs.

The quality of ordinary doors and Windows depends on the level of designers and the processing and installation capacity of doors and Windows enterprises, and is relatively insufficient in terms of help support and follow-up services. At the same time, ordinary doors and Windows are often after-sales doors, and the owner does not know who to find to repair the doors and Windows after the failure.

In the eyes of the average person, a door and window with a slightly better material is a system door and window. In the eyes of some door and window shops or designers, as long as the designed doors and Windows are system doors and Windows. When we choose doors and Windows, we can choose system doors and Windows to keep up with the pace of The Times.